Subject | Text |
Philips 32'' TV 32PT71B121 SSB Replacement | Hi,
I just found this great forum!
I've got a Philips 32'' TV that needs the SSB module replac |
60" Philips Rear Projection SSB Module Question | I need a new SSB Module board in my Philips 60" television. Can anyone tell me whether this in |
|
ssb module | this is a very easy plug in repair..just use care when pluging in the flat ribbon cable |
| When you replace the painter IC on the SSB panel you're going to need to put in all of the service a |
| Have you a permit to run this power at 5Mhz? Not for illegal broadcasting is it?
You don't say if |
| [quote:681fe79b24="Anonymous"]1. No video, not even faint
2. No menu
3. No sound
4. LED solid gre |
Umberto | The model is: SONY STR-V5, old receiver by SONY, years 1970 1980
http://www.thevintageknob.org/S |
| If you get the set to turn on go in the service menu and write down all the values. If you get the s |
| Most of these complaints are the SSB. Int sound, turns off, won't turn on ect. |
| Commem problem is replace SSB p#313912725871. Causes all sorts of problems. No pic, no sound, no ras |
| I’d replace the ssb. Small signal brd. Listen to Brian and take down the values. If you need the par |
| [quote:ad11cb86e0="mrroboto"][quote:ad11cb86e0="minnie"]Not short of replacing the SSB "small s |
| SSB
Ok not to sound like a know nothing, but I know which board is the power supply, & sound b |
Re: rca d52w15 | [quote:fd1a39c0ce="clint0310"]hello people i hope someone can give me some kind of help and i will |
Re: Phillips chassis PTV915 please help | [quote:ca725b9cbd="austin970"]no raster or sound when set is turned on the power button lights up fo |
| Not short of replacing the SSB "small signal board." I pulled up model 42PFL5603D27 with a |
| SSB #313926809052 |
|
Hey Wade | I am looking for a Sams Photofact for CB Radio Hy-Gain aka Hy-Range model V the SSB transciever sen |
PHILIPS 60P8341 CHASSIS PTV915??? | is the ssb located on lsb? thanks |
| Why do you want to erase the error buffer? Notes there does not affekt any funktion of the set. If y |
| This fault is normally due to the painter IC on the SSB panel which can give you some very strange f |
| First, check if you get supply voltage to the AM IF and RF stages.
Check if the frequency display i |
PHILIPS 60P8341 PTV915 | i have a philips model 60p8341a chassis #ptv915. it keeps shutting off by itself. i was told it was |
Phillips chassis PTV915 please help | no raster or sound when set is turned on the power button lights up for about 1 min then starts flas |
TV Philips 32pw8506, entering SDM via pins Not working! | Hi there.
I played around with the settings in the service alignment menu(SAM), and now unfortuna |
| chassis A8 if havent module ssb if have the chassis is A10
alain |
| Phillips suks. Replace the SSB. |
| minnie is the ssb located on lsb? philips ptv915 |
| Sound like a SSB problem. That would be the digital main board it usually has the video/audio jacks |
| Replace SSB p#313912725871. (Small signal board.) New part #PH3912725871. They also sell a kit PH391 |